Messages

Hello,

I have a question about ip connectivity between my home and work networks

Because I do teleworking from home, for isolation purposes,  I have this setup in my home:

the first router is connected to my provider (using dynamic ip, not static...) and has the ip 192.168.1.1 (a movistar router "GPT-2741GNAC")

the second router (ZXHN H367A) connected to the first router with the wan port at 192.168.1.2 and the lan ip set to 192.168.2.1, used to connect to my office laptop with the ip 192.168.2.100.

the third router (redmi ac2100) is connected to the first router with the wan port at 192.168.1.3 and the lan ip set to 192.168.3.1, used to connect to my home devices to the network 192.168.3.x: My home pc, for example has the ip 192.168.3.24

This way, network 192.168.2.x is isolated from network 192.168.3.x.

However, I want to access to my home pc trough rdp only from my office laptop.

Note1: I am already able to  access to 192.3.24 from any other device in the same 192.168.3.x network

I've tried to configure zxhn to port forwarding with no success: these are the settings I've tried:

in "internet" section, "security", "port forwarding":

name: myname
protocol tcp and udp
wan host ip address: from 192.168.3.24 to 192.168.3.24
lan host 192.168.2.100
wan port from 3389 to 3389
lan host port from 3389 to 3389

note 3: in "lan host" I can only write 192.168.2.x addresses

neither ping nor rdp works...

thanks in advance...