I currently have 2 buildings on campus (bldgs. 2 & 3) that has a very simple LAN configuration today. We are adding a wireless bridge in order to connect building 1 as shown in the picture. The idea is to connect the two networks in order to have the cameras in all buildings be connected to and viewed from the NVR in building 1. Other resources such as file servers, printers, etc. do not need to be shared, but they can be. I would like some advice configuring the routers to accomplish the combining of these 2 networks to simply share the camera resources at a minimum. The following are the specs on the equipment if that matters. I can change out routers or switches if necessary, but would rather not, if possible.
1) Routers = Ubiquiti EdgeRouter 4
2) Wireless Bridge = Ubiquiti NanoBeam ac Gen2 High-Performance airMAX ac Bridge (NBE-5AC-Gen2-US)
3) Switches = Ubiquiti EdgeSwitch 8, 8-Port Managed PoE+ Gigabit Switch with SFP
4) Cameras are all POE IP cameras.
There are many other peripherals that are not pertinent to the discussion.
Bandwidth speeds are fine and not a problem currently. Building "A" can continue using ISP "A" and buildings 2 and 3 can continue using ISP "B".
1) Routers = Ubiquiti EdgeRouter 4
2) Wireless Bridge = Ubiquiti NanoBeam ac Gen2 High-Performance airMAX ac Bridge (NBE-5AC-Gen2-US)
3) Switches = Ubiquiti EdgeSwitch 8, 8-Port Managed PoE+ Gigabit Switch with SFP
4) Cameras are all POE IP cameras.
There are many other peripherals that are not pertinent to the discussion.
Bandwidth speeds are fine and not a problem currently. Building "A" can continue using ISP "A" and buildings 2 and 3 can continue using ISP "B".