Would the next subnet be this?
208.200.201.0
Broadcast: 208.200.201.7
Host address range: 208.200.201.1 208.200.201.6
??
208.200.201.0
Broadcast: 208.200.201.7
Host address range: 208.200.201.1 208.200.201.6
??
- Welcome to Networking-Forums.com.
We're Here to Help!
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Pages1
#2
Homework Help / Subnetting help
September 21, 2016, 06:40:48 PM
Ok guys, here is the assignment:
FlatSmack Ping Pong Paddle Company has experienced an increase in demand and decided to move to a new facility. Viewing their existing network as outdated they have contracted you to design the network for the new facility using the information below
The new facility consists of a 25000 square foot manufacturing / warehouse building and a 2 story office building. The primary demark for the ISP is located in the office building server room.
The office building has a reception area, a conference room and 15 private offices on the first floor. The second floor is setup as a cubicle farm to accommodate 50 workers.
The local ISP has provided them a range of addresses indicated as 208.200.200.200/29
The requirements you have been tasked with are as follows:
Both buildings need to be connected
The manufacturing building has a high concentration of machinery but needs durable connections
The office building needs complete wireless coverage but the workstations must be wired
They need a private address scheme that will allow for future growth
The minimum wired connection speed cannot be below 100mbit and they would prefer 1000mbit
Provide a drawing of the network topology that shows the media and equipment used.
The firewall, VPN concentrator and Email server all need external IP addresses.
Using the info provided by the ISP show what the IP address for each would be in the notes for the drawing list what private IP range will be used for the internal clients
Now, I know how to lay everything out with the topology, and I know the the private IP range of addresses will use NAT. I'm just wanting someone to check my subnets. Typically, a /29 mask will give us 8 subnets and 6 nodes/hosts per net, but I can only come up with seven subnets for this scenario, because if I added another, I would be over 255. Below is what I've come up with. Any help or constructive criticism would be great
Net ID: 208.200.200.200
Broadcast Address – 208.200.200.207
Host address range: 208.200.200.201 - 208.200.200.206
208.200.200.208
Broadcast address 208.200.200.215
Host address range: 208.200.200.209 - 208.200.200.214
208.200.200.216
Broadcast address 208.200.200.223
Host address range: 208.200.200.217 - 208.200.200.222
208.200.200.224
Broadcast address 208.200.200.231
Host address range: 208.200.200.225 - 208.200.200.230
208.200.200.232
Broadcast address 208.200.200.239
Host address range: 208.200.200.233 - 208.200.200.238
208.200.200.240
Broadcast address 208.200.200.247
Host address range: 208.200.200.241 - 208.200.200.246
208.200.200.248
Broadcast address 208.200.200.255
Host address range: 208.200.200.249 - 208.200.200.254
FlatSmack Ping Pong Paddle Company has experienced an increase in demand and decided to move to a new facility. Viewing their existing network as outdated they have contracted you to design the network for the new facility using the information below
The new facility consists of a 25000 square foot manufacturing / warehouse building and a 2 story office building. The primary demark for the ISP is located in the office building server room.
The office building has a reception area, a conference room and 15 private offices on the first floor. The second floor is setup as a cubicle farm to accommodate 50 workers.
The local ISP has provided them a range of addresses indicated as 208.200.200.200/29
The requirements you have been tasked with are as follows:
Both buildings need to be connected
The manufacturing building has a high concentration of machinery but needs durable connections
The office building needs complete wireless coverage but the workstations must be wired
They need a private address scheme that will allow for future growth
The minimum wired connection speed cannot be below 100mbit and they would prefer 1000mbit
Provide a drawing of the network topology that shows the media and equipment used.
The firewall, VPN concentrator and Email server all need external IP addresses.
Using the info provided by the ISP show what the IP address for each would be in the notes for the drawing list what private IP range will be used for the internal clients
Now, I know how to lay everything out with the topology, and I know the the private IP range of addresses will use NAT. I'm just wanting someone to check my subnets. Typically, a /29 mask will give us 8 subnets and 6 nodes/hosts per net, but I can only come up with seven subnets for this scenario, because if I added another, I would be over 255. Below is what I've come up with. Any help or constructive criticism would be great
Net ID: 208.200.200.200
Broadcast Address – 208.200.200.207
Host address range: 208.200.200.201 - 208.200.200.206
208.200.200.208
Broadcast address 208.200.200.215
Host address range: 208.200.200.209 - 208.200.200.214
208.200.200.216
Broadcast address 208.200.200.223
Host address range: 208.200.200.217 - 208.200.200.222
208.200.200.224
Broadcast address 208.200.200.231
Host address range: 208.200.200.225 - 208.200.200.230
208.200.200.232
Broadcast address 208.200.200.239
Host address range: 208.200.200.233 - 208.200.200.238
208.200.200.240
Broadcast address 208.200.200.247
Host address range: 208.200.200.241 - 208.200.200.246
208.200.200.248
Broadcast address 208.200.200.255
Host address range: 208.200.200.249 - 208.200.200.254
Pages1