1.1.1.2

Started by deanwebb, November 17, 2016, 08:34:43 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

deanwebb

November 17, 2016, 08:34:43 PM
Found a switch with this IP address on my network today. It's in China somewhere. Need I add that 1.1.1.2 is *not* in our authorized range of IP addresses?

Looks like we got some work to do regarding standardizing our interface IPs...

:matrix:
Take a baseball bat and trash all the routers, shout out "IT'S A NETWORK PROBLEM NOW, SUCKERS!" and then peel out of the parking lot in your Ferrari.
"The world could perish if people only worked on things that were easy to handle." -- Vladimir Savchenko
Вопросы есть? Вопросов нет! | BCEB: Belkin Certified Expert Baffler | "Plan B is Plan A with an element of panic." -- John Clarke
Accounting is architecture, remember that!
Air gaps are high-latency Internet connections.

icecream-guy

#1
November 18, 2016, 05:52:07 AM
we got a bunch of those too, mostly on fail over links..
:professorcat:

My Moral Fibers have been cut.

deanwebb

#2
November 18, 2016, 09:45:53 AM
Fail over link is fine... but it should not be on an office-facing network... no idea if it's working properly, since it's a 10.x.x.x network the 1.1.1.2 is plugged into...
Take a baseball bat and trash all the routers, shout out "IT'S A NETWORK PROBLEM NOW, SUCKERS!" and then peel out of the parking lot in your Ferrari.
"The world could perish if people only worked on things that were easy to handle." -- Vladimir Savchenko
Вопросы есть? Вопросов нет! | BCEB: Belkin Certified Expert Baffler | "Plan B is Plan A with an element of panic." -- John Clarke
Accounting is architecture, remember that!
Air gaps are high-latency Internet connections.

icecream-guy

#3
November 18, 2016, 10:41:58 AM
it's not working properly, at least the management part.
:professorcat:

My Moral Fibers have been cut.
Print
Go Up Pages1
User actions