2960G keep trying to load conf from TFTP

Started by TheGreatDoc, January 09, 2016, 03:25:53 AM

Previous topic - Next topic
Print
Go Down Pages1
User actions

TheGreatDoc

January 09, 2016, 03:25:53 AM
Hi All,

I have a kind of problem with an old 2960G that is always asking for conf by tftp. Of course, everything on the switch related to tftp is disabled.

Code Select
2960G-Servidores#sh run | i tftp
2960G-Servidores#

Code Select
Switch   Ports  Model              SW Version              SW Image
------   -----  -----              ----------              ----------
*    1   24     WS-C2960G-24TC-L   12.2(35)SE5             C2960-LANBASE-M

This is happening for years now as nobody could help me with that.

Any ideas?

Thanks in advance!
a.k.a. Daniel.
I dont have any cert, just learned all by my self.

TheGreatDoc

#2
January 09, 2016, 05:20:56 AM
This is the output, what I cant understand completely.

Code Select
Configuration register is 0xF

a.k.a. Daniel.
I dont have any cert, just learned all by my self.

deanwebb

#4
January 09, 2016, 08:24:15 AM
Take a baseball bat and trash all the routers, shout out "IT'S A NETWORK PROBLEM NOW, SUCKERS!" and then peel out of the parking lot in your Ferrari.
"The world could perish if people only worked on things that were easy to handle." -- Vladimir Savchenko
Вопросы есть? Вопросов нет! | BCEB: Belkin Certified Expert Baffler | "Plan B is Plan A with an element of panic." -- John Clarke
Accounting is architecture, remember that!
Air gaps are high-latency Internet connections.

TheGreatDoc

#5
January 09, 2016, 08:36:42 AM
Quote from: deanwebb on January 09, 2016, 08:24:15 AM
and then config the switch, saving the running-config to the startup-config.

I dont like this part; If I do the "no service config" switch will do a factory reset or will keep current configuration?

Is one of our server farm switch. Is in production...But as I see in the cisco webpage, nothing sais that the switch will need a reconfiguration.
a.k.a. Daniel.
I dont have any cert, just learned all by my self.

deanwebb

#6
January 09, 2016, 10:30:17 AM
It will keep the current config. But you will want to copy the running-config to the startup-config, or if it reboots, it will bring the problem back.
Take a baseball bat and trash all the routers, shout out "IT'S A NETWORK PROBLEM NOW, SUCKERS!" and then peel out of the parking lot in your Ferrari.
"The world could perish if people only worked on things that were easy to handle." -- Vladimir Savchenko
Вопросы есть? Вопросов нет! | BCEB: Belkin Certified Expert Baffler | "Plan B is Plan A with an element of panic." -- John Clarke
Accounting is architecture, remember that!
Air gaps are high-latency Internet connections.

TheGreatDoc

#7
January 10, 2016, 03:06:23 AM
Thank you all for the answers.

I will try it tomorrow. You never know when your finger will go crazy and fuck the configuration, and I dont really like to work on weekends :D


a.k.a. Daniel.
I dont have any cert, just learned all by my self.

TheGreatDoc

#8
January 25, 2016, 03:36:14 AM
It worked, thank you very much!!!!!
a.k.a. Daniel.
I dont have any cert, just learned all by my self.

deanwebb

#9
January 25, 2016, 08:09:03 AM
Quote from: TheGreatDoc on January 25, 2016, 03:36:14 AM
It worked, thank you very much!!!!!
Awesome! That's great to hear. :banana:
Take a baseball bat and trash all the routers, shout out "IT'S A NETWORK PROBLEM NOW, SUCKERS!" and then peel out of the parking lot in your Ferrari.
"The world could perish if people only worked on things that were easy to handle." -- Vladimir Savchenko
Вопросы есть? Вопросов нет! | BCEB: Belkin Certified Expert Baffler | "Plan B is Plan A with an element of panic." -- John Clarke
Accounting is architecture, remember that!
Air gaps are high-latency Internet connections.
Print
Go Up Pages1
User actions