PortFast - Can you do me a favor?

Started by NetworkGroover, January 16, 2024, 11:52:17 AM

Previous topic - Next topic
Print
Go Down Pages1
User actions

NetworkGroover

January 16, 2024, 11:52:17 AM
Hey all - hope you've been well.

I'm curious, if anyone has a Cisco switch handy, could you configure a port with PortFast, unplug then replug, and post the output of logging messages that get sent versus without PortFast?  I'm curious if the learning stage still gets reported or not.
Engineer by day, DJ by night, family first always

deanwebb

#1
January 17, 2024, 10:20:18 PM
Aw man, and here I am on the road... :D

What logging level do you want turned on for the console?
Take a baseball bat and trash all the routers, shout out "IT'S A NETWORK PROBLEM NOW, SUCKERS!" and then peel out of the parking lot in your Ferrari.
"The world could perish if people only worked on things that were easy to handle." -- Vladimir Savchenko
Вопросы есть? Вопросов нет! | BCEB: Belkin Certified Expert Baffler | "Plan B is Plan A with an element of panic." -- John Clarke
Accounting is architecture, remember that!
Air gaps are high-latency Internet connections.

icecream-guy

#2
January 18, 2024, 05:52:50 PM
it all depends on you logging level, whether it gets reported or not.  set to debug and see if it makes a difference.
:professorcat:

My Moral Fibers have been cut.
Print
Go Up Pages1
User actions